Hot water heater Care And Maintenance – Plumbing Repairs And Plumbing Information

Your water heater is one that is used and more appliances in your home, and consumes a large involving your energy dollars each month. And experts say regular care and maintenance is essential to protecting your investment and saving around the home heating and costs.

Regular flushing of the water heater is among the single most important step you get to prolong its service life in addition, it save energy. During time, sediments mount up in the bottom of your hot water heater. These sediments act as a barrier between the flame and the tank, thereby making your heater burn longer and hotter. This is not merely destructive to the tank, but highly inefficient and will significantly raise your heating costs.

In most areas of the country, the normal water heater lasts 3-5 years. Regularly flushing your hot water heater can double the life of your hot water heater from 3-5 to 7-10 years. Are investigating costs of replacement running from $700 to over $1200 in some cases, getting the most out of your heater is a must in today’s affordable. In addition, regular flushing makes your hot water heater run more efficiently and can cut heating costs fifty percent. Depending on the volume of warm water your home uses, that can mean a savings of $20 to over $50 a fair amount of time.

To drain your water heater, you can find should set the thermostat to pilot (if it can be a gas water heater) or turn the circuit breaker off (if it is actually electric heater). Failure to do so could result in overheating and severe damage to the heater. Next, close the water supply valve located over the water inlet line going into your water heater. Equipped to connect a hose to the drain valve located at the bottom of the heater tank. Open the drain and allow it to function until all for the water has emptied from the heater. Then close the drain. Open the water supply valve and refill the heater. You should also open a hot water faucet somewhere inside and stand there and watch it run for several minutes until the flows out perfectly. This will allow air to vent because of the heater and the hot water lines. Finally, you can turn the thermostat to be able to its regular setting (for a gas heater), or turn the circuit breakers back on (for an electric heater).

Besides regularly flushing your water heater, plumbing experts also advise adding a water treatment system home to filter or condition the water so it is less corrosive to your plumbing system, particularly in areas which have hard this type of water. For more ways to care for and protect your home plumbing system, contact a licensed, professional plumbing contractor in region to discuss options and merchandise to provide what you need.

Abacus Plumbing, Air Conditioning & Electrical

The Woodlands, TX

(281) 528-1610

https://goo.gl/maps/Fccz1JjKrjN2

Bookmark the permalink.